Rosewill RNWB-11001 사용자 설명서

)

 

1)  Sometimes the connection cannot be disconnected although you specify a time 

to Max Idle Time, since some applications is visiting the Internet continually in the 
background. 

2)  If you are a Cable user, please configure the Router following the above steps. 

1)  Log in to the Router, click the “Network” menu on the left of your browser, and 

click "WAN" submenu. On the WAN page, select “Dynamic IP” for "WAN 

Connection Type", finish by clicking Save. 

2)  Some ISPs require that you register the MAC Address of your adapter, which is 

connected to your cable/DSL Modem during installation. If your ISP requires 

MAC register, log in to the Router and click the "Network" menu link on the left of 

your browser, and then click "MAC Clone" submenu link. On the "MAC Clone" 

page, if your PC’s MAC address is proper MAC address, click the Clone MAC 

Address button and your PC’s MAC address will fill in the "WAN MAC Address" 

field. Or else, type the MAC Address into the "WAN MAC Address" field. The 

format for the MAC Address is XX-XX-XX-XX-XX-XX. Then click the Save button. 

It will take effect after rebooting. 

 

Figure A-3  MAC Clone 

1)  If you start NetMeeting as a sponsor, you don’t need to do anything with the 

Router. 

2)  If you start as a response, you need to configure Virtual Server or DMZ Host and 

make sure the H323 ALG is enabled. 

-115-