RAD Data comm ASMi-52 사용자 설명서
Appendix B IR-IP Interface Module
Installation and Operation Manual
B-24
Viewing IR-IP configuration Data
ASMi-52 Ver. 2.5
IR_IP
<IR-IP>
S/W Ver. 1.21 (date)
VIEW CONFIGURATION
------------------
BOOT Version:
1.06 18.03.1999
Device Name:
IP router card
System Location:
The location of this device
Contact Person:
Name of contact Person
MAC Address:
00-20-D2-16-3F-9B
Default Gateway:
WAN
Intrf Type
Baud (kbps) Prot
IP Address
IP Mask
Status
.....................................................................
LAN UTP
-------
Ethr
192.168.205.005 255.255.255.000 Connected
WAN V.110
FR
Not Conn.
Press any key to continue:
Figure B-19. View Configuration Screen
Viewing the ARP Tables
This screen is used to display the IR-IP ARP table. This table shows the IP address
assigned to each station on the LAN (the stations are identified by their MAC
addresses).
assigned to each station on the LAN (the stations are identified by their MAC
addresses).
To access the ARP Tables screen:
• From the View menu, select ARP Tables.
• From the View menu, select ARP Tables.
The ARP Tables screen appears (
Figure B-20
).
IR_IP
<IR-IP>
S/W Ver. 1.21 (date)
ARP Table
---------
IP Address
MAC Address
IP Address
MAC Address
192.168.205.003
00-40-33-20-C8-3C
Press any key for exit
Figure B-20. ARP Tables Screen
Viewing the Multicast Groups Table
This screen is used to display information about the multicast group IP addresses
and their status.
and their status.
To access the multicast groups table screen:
• In the View menu, select Multicast Groups Table.
• In the View menu, select Multicast Groups Table.
The Multicast Groups Table screen appears (
Figure B-21
).