Trendnet TEW712BR 사용자 설명서
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-712BR
30
1. Log into your router management page (see “
on page 24).
2. Click on Management, and click on Remote Management.
3. Next to Multicast Stream, click Enabled or Disabled to turn the feature on or off on
3. Next to Multicast Stream, click Enabled or Disabled to turn the feature on or off on
your router.
Note: It is recommended to leave this setting enabled.
4. To save changes, click Apply.
Identify your network on the Internet
Main > Dynamic DNS
Since most ISPs constantly change your home IP address, providing access to devices on
your home or small office Local Area Network (such as IP Cameras) from the Internet
requires setting up a Dynamic DNS service and entering the parameters into this
management area. Dynamic DNS services allow your router to confirm its location to the
given Dynamic DNS service, thereby providing the Dynamic DNS service with the ability
to provide a virtual fixed IP address for your network. This means that even though your
ISP is always changing your IP address, the Dynamic DNS service will be able to identify
your network using a fixed address—one that can be used to view home IP Camera and
other devices on your local area network.
Note: First, you will need to sign up for one of the DDNS service providers listed in
the Server Address drop-down list.
1. Sign up for one of the DDNS available service providers list under Server Address.
(e.g. dyndns.com, no-ip.com, etc.)
2. Log into your router management page (see “
on page 24).
3. Click on Main and click on Dynamic DNS.
4. Next to DDNS, click Enabled.
5. In the Server Address drop-down list, select the provider you selected, and enter your
4. Next to DDNS, click Enabled.
5. In the Server Address drop-down list, select the provider you selected, and enter your
information in the fields.
• Host Name: Personal URL provided to you by your Dynamic DNS service provider
(e.g. www.trendnet.dyndns.biz)
• User Name: The user name needed to log in to your Dynamic DNS service account
• Password: This is the password to gain access to Dynamic DNS service (NOT your
router or wireless network password) for which you have signed up to.
6. To save changes, click Apply.
Allow remote access to your router management page
Management > Remote Management
You may want to make changes to your router from a remote location such at your
office or another location while away from your home.
1. Log into your router management page (see “
1. Log into your router management page (see “
on page 24).
2. Click on Management, and click on Remote Management.
3. Under the HTTP section, click Enabled.
3. Under the HTTP section, click Enabled.
• Port– It is recommended to leave this setting as 8080.
Note: If you have configured port 8080 for another configuration section such
as virtual server or special application, please change the port to use.
(Recommended port range 1024-65534)
• Remote IP Range – It is recommended to leave this setting as *, to allow remote
access from anywhere on the Internet.
Note: You can enter a specific range of Internet IP addresses that are allowed to
access your router management page, all others will be denied.