Roland TD-15 사용자 설명서
Settings for the Entire TD (SYSTEM)
46
Viewing Information About
the TD (Information)
Here you can view information about the TD itself.
For details on the procedure, refer to “Basic procedure”
For details on the procedure, refer to “Basic procedure”
Item
Description
Program Ver .
System program version
Restoring the Factory Settings
(Factory Reset)
This “factory reset” operation restores all drum kits and
system settings in the TD to their factory-set state.
NOTE
• All data and settings in the TD will be lost. If the TD
contains any data or settings that you want to keep,
you must save them to a USB flash drive before you
proceed (p. 38).
• This operation cannot be executed if “Write Protect”
(p. 35) is ON.
1.
In step 4 of the basic procedure (p . 34), choose
“Factory Reset” and then press the [F3] (ENTER)
button to access the FACTORY RESET screen .
2.
Use the value dial to select the type of data that
you want to reset .
Parameter
Value
Description
Target
ALL KITS
All kits
SYSTEM
System settings
ALL
All data
3.
Press the [F3] (RESET) button .
A confirmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
4.
If you’re sure you want to execute the factory
reset, press the [F3] (OK) button .
Once again, a confirmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
5.
If you’re sure you want to execute the factory
reset, press the [F3] (OK) button .
When the factory reset has been completed, the screen
will indicate “Completed.”