Roland TD-15 사용자 설명서

Use a USB cable to connect the TD

to your computer (p. 47). MIDI data

and audio data can be sent via USB

to and from your DAW software.

You can connect your USB flash drive

(separately sold) here, and play back

audio files from it (p. 27) or save TD

settings on it (p. 38).

•  Use USB flash drive sold by Roland. We

cannot guarantee operation if other products

are used.

•  Never insert or remove a USB flash drive while

this unit is turned on. Doing so may corrupt

the unit’s data or the data on the USB flash

drive.

•  Carefully insert the USB flash drive all the way

in-until it is firmly in place.

Attach the included sound module mounting plate

here to attach the TD to your drum stand.
Use the included wing bolts to attach the plate as

shown in the illustration.

*  Use only the included wing bolts. Using any other

bolts will cause malfunctions.

*  The TD must be attached to the sound module

mounting plate when in use.

Connect the included

dedicated cable to this

connector, and use it to

connect the pads and

pedals.

To prevent the inadvertent disruption of power

to your unit (should the plug be pulled out

accidentally), and to avoid applying undue stress

to the DC IN jack, anchor the power cord using the

cord hook, as shown in the illustration.

When turning the unit upside down, be sure to handle the unit with care so as to prevent damage to the buttons, knobs,

etc.