Trendnet TW-H6W1IR 사용자 설명서

다운로드
페이지 165
TW-H6W1IR ISDN Remote Router 
 
Configuration and Management 
41 
??
Hops – this is an associated RIP metric that may have its value set 
between 1 and 15, inclusive.   A metric value higher than 15 (such 
as 16) means that the network is unreachable. 
??
Intf [Interface] – this is the network interface containing the 
gateway that the packets will be forwarded through. 
??
State – this enables/disables a particular entry. 
IP Static Route Examples 
The IP Static Route Table shown in the example IP Static Route screen 
above has the first three entries configured for common implementations 
of static routing. 
The first entry assumes that ISDN1 has a connection to the Internet and 
defines the default next hop router. If you use this router to connect to 
the Internet it is very important that you create an entry here that defines 
the default next hop router as your ISP. This configuration is also 
commonly used when RIP exchanges with other Internet routers (on 
ISDN1) are disabled. 
The second entry shows how to configure static routes when there is 
another router on the LAN. The IP Address shown (202.12.125.0) is 
the network address for a branch office, for example. The Gateway 
Address (210.172.23.1) is the IP address to the LAN port on another 
router on the LAN that maintains an ISDN connection to the branch 
office. 
The third entry is an example of an enterprise ISDN connection 
(through telephone lines) to another router, at a branch office for 
example. The IP Address is the network address of the branch office.  
The Gateway Address is the IP Address of the ISDN port on the