Trendnet TEW812DRU 사용자 설명서
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-812DRU
24
• Xpress™ Technology: Is frame bursting technology built by Broadcom to improve
wireless performance. It is recommended to leave this feature On.
Access Control Filters
Access control basics
Advanced > Access Control
LAN Client Filter
Advanced > Access Control
You may want to block computers or devices on your network access to specific ports
(used or required by a specific application) to the Internet.
1. Log into your router management page (see “
1. Log into your router management page (see “
on page 26).
2. Click on Advance, click on Access Control.
3. Select Enable to enable LAN Client Filter Function.
4. Review the settings under LAN Client Filter Rules section
• IP Range – Enter the IP address or IP address range to apply the protocol (e.g.
192.168.10.20-192.168.10.20 or 192.168.10.20-192.168.10.30).
Note: The filter will not be applied to IP addresses outside of the range
specified. You can leave the field blank to enable the rule for the entire LAN
clients.
• Protocol: Select the protocol you would like to apply the rule to.
• Port Range: Enter the port or port range to apply the protocol.
• Enabled: Selecting Enable turns on the filter
• Schedule: Select the defined schedule you would like to have the rule to be
applied. (see “
” section on page 32).
• Policy Name: Enter a name for the Protocol/IP Filter.
5. Click Apply to save settings.
URL Filter
Advanced > Access Control
You may want to block computers or devices on your network access to specific ports
(used or required by a specific application) to the Internet.
1. Log into your router management page (see “
1. Log into your router management page (see “
on page 26).