Rosewill RNX-GX4 사용자 설명서

 

 

 

29

 

3.5.1 Primary AP Setup 

3.5.1.1

 Router’s Wireless Basic Setup 

First please use Cable connection connected to the Wireless Router’s LAN port. 

After established the connection and login into the web management page, 

please select “Primary AP Setup” option under “Wireless Management”. 

Then you should see the same as below diagram. (The default “Wireless 

Network Status” is “Enable”.) You can also select to start the “Secondary AP 

Setup” which defaults as Disable. 

 

 

You will need to assign the below wireless options: 

h  Wireless Network Status: 

You can choose “enable” or “disable” to enable or disable the “Wireless 

Network Status”, if what you choose is “Disable”, the AP function of 

wireless router will be turned off. 

h  Radio Band:   

You can select the wireless standards running on your network, if you 

have Wireless-G, and Wireless-B devices in your network, keep the 

default setting, 802.11b/g Mixed.   

h  SSID: 

This is the broadcasting name for your wireless connection. You can 

change SSID to the name you desire. Your PC/NB will need to connect 

to the same SSID that your Wireless Router uses. The Default SSID is 

“ROSEWILL”.  

h  SSID Broadcasting: 

 

Dual-AP Function: We provide Dual-AP function for you to setup two SSID as two wireless networks 

for the ease of control on your network management. You can set both Primary AP and Secondary 

AP as different Network. The settings for Dual-AP are fundamentally the same.