Rosewill RNX-GX4 사용자 설명서

 

 

 

4

• Place connecting cables carefully so that no one will step on them or stumble over them. 

• Always disconnect all cables from this device before servicing or disassembling. 

• Use ONLY an appropriate power adaptor or cord for your device. 

• Connect the power adaptor or cord to the right supply voltage (for example, 110V AC in North 

America or 230V AC in Europe). 

• Do not allow anything to rest on the power adaptor or cord and do not place the product where 

anyone can walk on the power adaptor or cord. 

• Do not use the device if the power adaptor or cord is damaged as it might cause electrocution.   

• If the power adaptor or cord is damaged, remove it from the power outlet. 

• Do not attempt to repair the power adaptor or cord. Contact your local vendor to order a new one. 

• Do not use the device outside, and make sure all the connections are indoors.   

• Do not obstruct the device ventilation slots, as insufficient airflow may harm your device. 

• Do not use this product near water, eg, in wet basement, or near a swimming pool. 

• Do not expose your device to dampness, dust or corrosive liquids. 

• Do not install, use, or service this device during a thunderstorm. There is a remote risk of electric 

shock from lightning. 

• Connect ONLY suitable accessories to the device. 

• Do not open the device or unit. Opening or removing covers can expose you to dangerous high 

voltage points or other risks. ONLY qualified service personnel should service or disassemble this 

device. Please contact your vendor for further information. 

• Make sure to connect the cables to the correct ports. 

• If you wall mount your device, make sure that no electrical lines, gas or water pipes will be 

damaged. 

Your product is marked with this symbol, which is known as the WEEE mark. WEEE 

stands for Waste Electronics and Electrical Equipment. It means that used electrical and 

electronic products should not be mixed with general waste. Used electrical and 

electronic equipment should be treated separately.