Rosewill RNX-GX4 사용자 설명서

 

 

 

50

A: The default IP address is 192.168.1.1. 

 

However If you changed the IP address in “LAN IP address” of “LAN Setup” and 

have forgot, you might get the IP address of RNX-GX4 by looking up the IP address 

of the default gateway for your computer. 

 

To do this in most Windows OS computers, click Start > Run, Type “cmd”, and then 

enter “ipconfig”. The IP address of the Default Gateway should be the IP address of 

the RNX-GX4 (This applies to most home network environments). 

 

If your RNX-GX4 is a DHCP client, you can find your IP address from the DHCP 

server. This information is only available from the DHCP server which allocates IP 

addresses in your network. Find this information directly from the DHCP server or 

contact your system administrator for more information. Or you will need to reset 

your RNX-GX4 to default. This means your current settings will be lost.   

 

A: The default password is “guest”. If this doesn’t work, you have to reset your 

RNX-GX4 using the “Default” button on the back of the RNX-GX4, Please see 

 for detailed steps in resetting your RNX-GX4 manually. 

 

A: Make sure you are using the correct IP address. You can also try below methods. 

h  The default IP address is 192.168.1.1. 
h  If you changed the default IP address, please use your changed IP 

address. 

h  If you changed the IP address and have forgotten it, see the Question 1 

on how to find the IP address of your RNX-GX4. 

h  Reset the device to its factory defaults, and try to access the RNX-GX4 

with the default IP address 

h  If the problem continues, contact the network administrator or Rosewill. 

 

A: Check the hardware connections, and make sure the LEDs are behaving as