Trendnet BRF114 사용자 설명서

Operation and Status 

 

The hardware address of this device, as seen by remote devices 
on the Internet. (This is different to the hardware address seen by 
devices on the local LAN.) 

The IP Address of this device, as seen by Internet users. This 
address is allocated by your ISP (Internet Service Provider). 

The Network Mask associated with the IP Address above. 

This indicates whether or not the connection is currently estab-
lished. 
•  If the connection does not exist, the "Connect" button can be 

used to establish a connection. 

•  If the connection currently exists, the "Disconnect" button 

can be used to break the connection. 

•  The Connection Log shows status messages relating to the 

existing connection. 

•  The most common messages are listed in the table below. 
•  The "Clear Log" button will restart the Log, while the Re-

fresh button will update the messages shown on screen. 

If not connected, establish a connection to your ISP. 

If connected to your ISP, hang up the connection. 

Delete all data currently in the Log. This will make it easier to 
read new messages. 

Update the data on screen. 

 

35