Trendnet BRF114 사용자 설명서

Other Features and Settings 

 

Check this to enable the RIP (Routing Information Protocol) feature 
of the TW100-BRF114.  

The TW100-BRF114 supports RIP 1 only. 

This list shows all entries in the Routing Table. 
•  The "Properties" area shows details of the selected item in the 

list. 

•  Change any the properties as required, then click the "Update" 

button to save the changes to the selected entry. 

•  Destination Network - The network address of the remote LAN 

segment. For standard class "C" LANs, the network address is 
the first 3 fields of the Destination IP Address. The 4th (last) 
field can be left at 0. 

•  Network Mask - The Network Mask for the remote LAN 

segment. For class "C" networks, the default mask is 
255.255.255.0 

•  Gateway IP Address - The IP Address of the Gateway or 

Router which the TW100-BRF114 must use to communicate 
with the destination above. (NOT the router attached to the re-
mote segment.) 

•  Metric - The number of "hops" (routers) to pass through to 

reach the remote LAN segment. The shortest path will be used. 
The default value is 1. 

Save the RIP setting. This has no effect on the Static Routing Table. 

Add a new entry to the Static Routing table, using the data shown in 
the "Properties" area on screen. The entry selected in the list is 
ignored, and has no effect. 

73