Toshiba 6000 Series 사용자 설명서
197
If Something Goes Wrong
Problems when you turn on the computer
6
Save the file and refer to it when you contact the software
manufacturer.
manufacturer.
Problems when you turn on the computer
These problems may occur when you turn on the power.
The computer will not start.
Make sure you attached the AC adapter and power cable properly
or installed a charged battery.
or installed a charged battery.
Press and hold down the power button for a few seconds.
If you are using the AC adapter, check that the wall outlet is
working by plugging in another device, such as a lamp.
working by plugging in another device, such as a lamp.
The computer starts but, when you press a key, nothing
happens.
happens.
You are probably in Stand By mode and have a software or
resource conflict. When this happens, turning the power on returns
you to the problem instead of restarting the system. To clear the
condition, press
resource conflict. When this happens, turning the power on returns
you to the problem instead of restarting the system. To clear the
condition, press
Ctrl
,
Alt
, and
Del
simultaneously.
Clearing the condition may get the computer running, but it won’t
solve a resource conflict. Read the documentation that came with
the conflicting device and
solve a resource conflict. Read the documentation that came with
the conflicting device and
.
The computer is not accessing the hard disk or the external
diskette drive.
diskette drive.
Your computer normally loads the operating system from the hard
disk. If you have a hard disk problem, you will not be able to start
the computer. Insert a system diskette into the external diskette
drive and press F12 when the machine starts and use the arrow
keys to select the boot-up device.
disk. If you have a hard disk problem, you will not be able to start
the computer. Insert a system diskette into the external diskette
drive and press F12 when the machine starts and use the arrow
keys to select the boot-up device.