TP-LINK AC1750 사용자 설명서
80
Chapter 12
Specify Your Network Settings
8 ) Enter the
Pre-Shared Key
for IKE authentication. Then
keep
Perfect Forward Secrecy
enabled.
Note:
The key should consist of visible characters without blank space.
Make sure Site A and Site B use the same key.
Make sure Site A and Site B use the same key.
9 ) Leave the
Advanced
Settings as default value. Then click
OK
to save.
3 Configuration on Site B (remote network). Refer to step 2
configuration on Site A and make sure that Site A and Site B
use the same
use the same
pre-shared keys
and
Perfect Forward Secrecy
settings.
4 The
Status
column will change to
UP
if the VPN connection
has been set up successfully.
5 Check the VPN connection. You can ping site B’ LAN IP
from your computer in site A to verify that the IPSec VPN
connection is set up correctly.
connection is set up correctly.
Tips: To check the VPN connection, you can do the following.
On the host in Site A, press
[Windows Logo]
+
[R]
to open Run dialog. Input “
cmd
”
and hit
OK.
In the CLI window, type in “ping 192.168.2.x” (“192.168.2.x”
can be IP address of any host in Site B). Then press [Enter].