Avocent 5240 사용자 설명서
21
C H A P T E R
2
Accessing the MergePoint 5224/
5240 Appliance and Target Devices
5240 Appliance and Target Devices
The following topics describe how to access the MergePoint 5224/5240 SP manager and
target devices:
target devices:
•
•
•
•
•
•
NOTE: Chapter 3 describes using the Web Manager to manage target devices. This chapter contains
procedures that must be performed on the command line.
procedures that must be performed on the command line.
Accessing the MergePoint 5224/5240 SP Manager’s Console
As described under User Shell (rmenush) on page 16 and SP Shell (spshell) on page 17, authorized
users who connect to the MergePoint 5224/5240 SP manager’s console are presented with a menu
of choices. From the initial menu, users can bring up a list of target devices that they are authorized
to access and then access a submenu of management actions they can perform on the selected
target device.
users who connect to the MergePoint 5224/5240 SP manager’s console are presented with a menu
of choices. From the initial menu, users can bring up a list of target devices that they are authorized
to access and then access a submenu of management actions they can perform on the selected
target device.
This section describes how to access the MergePoint 5224/5240 SP manager’s console using SSH.
The following procedure requires the listed prerequisites to be met:
The following procedure requires the listed prerequisites to be met:
•
The user must know the IP address of the MergePoint 5224/5240 SP manager.
•
The user must have a username and password for the MergePoint 5224/5240 SP manager.
•
The user’s workstation must be running an SSH client and either has an SSH application such
as PuTTY or access to the command line.
as PuTTY or access to the command line.
•
If using the ssh command, the user must know the correct format, which is described in ssh
command line format on page 18.
command line format on page 18.