Avaya CMC1 사용자 설명서

●

Do not allow anything to rest on the power cord. Do not locate this product where the cord 
will be abused by persons walking on it.

●

Do not overload wall outlets and extension cords as this can result in the risk of line or 
electric shock.

●

Disconnect the cords on this product and refer servicing to qualified service personnel 
under the following conditions:

●

If the power supply cord or plug is damaged or frayed.

●

If liquid has been spilled into it.

●

If it has been exposed to rain or water.

●

If it was dropped or the housing has been damaged.

●

If it exhibits a distinct change in performance.

●

If it does not operate normally when following the operating instructions.

The P333T-PWR Power over Ethernet Stackable Switch can be used to power 46xx series IP 
telephones in addition to providing a 10/100 megabits per second Ethernet connection. The 
switch can form part of a stack with the G700 Media Gateway or members of the P330 
stackable switching system.

CAUTION:

The Avaya P333T-PWR switch does not contain any user-serviceable 
components inside. Do not open the case.

CAUTION:

The P333T-PWR switch can be used only indoors and in a controlled 
environment.

The P333T-PWR switch has 24, 10/100 Base-T ports, each of which can supply up to 16.5 
watts using the internal power supply and operates on a 100–240 volts AC, 5.3 amperes, 50/60 
hertz power source with the option of using the 44~57 volts DC, 15 amperes to boost the InLine 
power.

The P333T-PWR switch can be placed in a wiring closet or on a flat, stable surface like a desk. 
Screws are provided for mounting in a standard 19-inch rack.

To power up the AC power supply:

1. Insert the power cord into the power connector (BUPS or AC Power Supply) on the rear of 

the unit. See 

.