Avaya CMC1 사용자 설명서

To check link status:

1. Enter display communication-interface links and press RETURN.

2. Note all administered links.

3. Type status link number and press RETURN for each administered link.

Check the following fields for the values listed:

●

Link Status

 = connected

●

Service State

 = in service

Note:

For Release 7 and later, the only way to determine if an ISDN-PRI D-Channel is 
up is to type status signaling group and press RETURN.

4. If any of the links are not up, take the necessary corrective action to restore the link before 

continuing with the upgrade.

To save translations:

1. Type save translation and press RETURN to write all translations from memory to the 

translation flashcard (about 10 minutes).

2. Ensure that the save translation command was successful (error code must be zero). If the 

value is anything else, the translations were not copied to the flashcard. If the translations 
are corrupted, the following error message appears when logging in:

!

WARNING:

Translation corruption detected; call an Avaya distributor immediately.

Note:

The save translation command does not run if the translations are corrupt or do 
not match (duplicated systems only).