Avaya CMC1 사용자 설명서

3. Type list configuration software-version and press RETURN. 

The Software Versions screen appears.

4. In the UPDATE FILE section, check the 

Update State

 field for a software patch:

●

If there is a patch number, then a patch has been applied.

●

If the field is 

none in memory

, there is no software patch in system memory.

Note:

If you need to restore the system to the old version, you must also download a 
patch onto the system.

5. In the SOFTWARE VERSION section note the current version listed in the 

Memory 

Resident

 field.

To check link status:

1. Type display communication-links and press RETURN.

Ensure that the link administration is the same as before the upgrade.

2. Type status link number and press RETURN for each administered link.

Check these fields for the corresponding values:

●

Link Status

 = connected

●

Service State

 = in service

If any of the links are not up, take the necessary corrective action to restore the link

3. Type list signaling-group press RETURN. 

Check the system to ensure that the signaling group administration is the same as before 
the upgrade.

4. For each signaling group, type status signal number and press RETURN.

Ensure that the 

Group State

 field is in-service.

If the system had ISDN-PRI D-channel links administered, check that those links are 
in-service.

5. Execute the following commands to ensure that the administration is the same as before the 

upgrade:

●

list station 

●

list trunk-group 

●

list hunt-group 

●

list data-module