Avaya CMC1 사용자 설명서

2. Look in the 

Result

 field for FAIL/PASS conditions.

The 

Result

 field in the screen shows PASS, indicating a successful test of the firmware 

download circuitry.

If the 

Result

 field shows FAIL, refer to the Maintenance for Avaya DEFINITY Server R in 

the FW-DWNLD maintenance object section, subsection entitled System 
Technician-Demanded Tests: Descriptions and Error Codes. Resolve every error and rerun 
the test.

When the test passes, every specified resource is currently available for the scheduled 
download. Note, however, that this does not guarantee the resource will still be available at the 
time of the download.

To back out of a completed firmware download and revert to the previous image, follow the 
same download procedure you did before, except use the previous firmware vintage instead. 
The exception is TN799DP (C-LAN) and TN2501AP (VAL), which have a separate procedure.

To revert back to the old firmware image file on a TN799DP (C-LAN) or TN2501AP (VAL) only:

1. Type get boot-image UUCSS and press Enter to check the status of the firmware images 

on the target circuit pack. .

2. Check the 

Active Image: 

field in the 

Image 1

 and 

Image 2

 columns to see where the 

active image resides. 

get boot-image 1C07

              DISPLAY FIRMWARE IMAGE(S)

       Image 1    Image 2

 Board Type: TN2501     TN2501

 FW Vintage: 02       01

HW Signature: 02       02

   Suffix: A       A

    Date: 09/13/02    05/06/02

CRC Checksum: Good      Good

Active Image: Yes      No

Reboot Image: Yes      No