Avaya CMC1 사용자 설명서

1. On the system management terminal, press ENTER to get the login prompt to the 

Communication Manager switch.

Note:

If you get garbled text, check the baud rate setting on the Port Setup Menu. You 
can adjust it up or down.

2. If no login prompt appears, log back into the IOLAN+ through HyperTerminal.

3. Select Admin mode > stats and press ENTER twice.

4. Select users and press ENTER.

5. Look at the port that the adjunct is connected to and see if there is any traffic. If not, check 

all your connections and administration fields.

After you have successfully administered and validated the connection between the adjunct and 
the C-LAN circuit pack through the IOLAN+, you can disconnect the laptop or other PC from the 
IOLAN+. No further IOLAN+ administration is required.

If a link goes down between the terminal server and the switch, you must reboot the terminal 
server for the link come back up. If you are performing a software upgrade or if a system reset 
occurs, you must reboot the terminal server to restore the link. See 

page 305 for instructions.

** Administrator **          SERVER STATISTICS                      Terminal: 2

 1. port1            Talking to host 172.22.22.67.5111<DSR+CTS+DCD >DTR+RTS

 2. port 2           SERVER STATISTICS               <DSR+DCD >DTR+RTS

 3. port 3           waiting for DSR or DCD           >DTR+RTS

 4. port 4 modem     waiting for DSR or DCD           >DTR+RTS

REM <unknown>        logged out

LOG                  logger not enabled

________________________________________________________________________________

    Press <RETURN> to see list of options.

IOLAN PLUS v4.02.00 a CDi                                              iolan-st