Atlantis Land 111U 사용자 설명서

 

 

76 

multiple local IP addresses to one global IP 

address. This is equivalent to Many to One 

(i.e., PAT, port address translation) 

• 

Many-to-Many Overload: This is mode 

maps multiple local IP addresses to shared 

global IP addresses 

• 

Many-to-Many No Overload: This is the 

mode maps each local IP

address to unique 

global IP addresses 

• 

Server: This type allows you to specify 

inside servers of different services behind 

the NAT to be accessible to the outside 

world. 

This is the starting Inside Local IP Address (ILA). Local 

IP addresses are N/A for Server port mapping 

This is the end Inside Local IP Address (ILA). If your 

rule is for all local IP addresses, then enter 0.0.0.0 as 

the Local Start IP address and 255.255.255.255 as the 

Local End IP  address. This field is N/A  for One-to-one 

and Server mapping types 

This is the starting Inside Public IP Address. Enter 

0.0.0.0 here if you have a dynamic IP address from 

your ISP 

This is the ending Inside Public IP Address. This field is 

N/A for One-to-one, Many-to-One and Server mapping 

types 

 

 

If you have disabled the NAT option in the WAN-ISP section, 

the Virtual Server function will hence be invalid. 

If the DHCP server option is enabled, you have to be very 

careful in assigning the IP addresses of the virtual servers in 

order to avoid conflicts. The easiest way of configuring Virtual 

Servers is to manually assign static IP address to each virtual 

server PC, with an address that does not fall into the range of 

IP addresses that are to be issued by the DHCP server. You