Buffalo Technology WZR-G108 사용자 설명서

LAN Cable

(Straight CAT 5)

LAN Cable

AC Power

Internet

Cable/DSL

Modem

Wireless

Laptop

1.  Power down the cable or DSL modem and the computer which will be 

used to configure the AirStation router.

2.  Plug the cable or DSL’s LAN Ethernet cable into the AirStation’s WAN 

port.  Initially, you may need to unplug this cable from your computer, 

hub or other router.

3. Plug the provided Ethernet cable into a LAN port on the AirStation and 

plug the other end into your computer’s Ethernet adapter’s (NIC) 

port.  If you plan to initially configure the AirStation wirelessly (not 

recommended), you may skip this step.

4. Power on your cable or DSL modem and wait one full minute, Power 

on the AirStation router, wait one full minute, and then power on the 

computer which will be used to configure the AirStation.  If the red 

DIAG light on the AirStation is lit or flashing after several minutes 

of being powered on, please consult Buffalo Technology Technical 

Support.