Billion Electric Company 7300(G) 사용자 설명서

default settings. The login will be reset to admin and the 
password will be reset to admin, and the modem will be 
accessible via its default IP address at http://192.168.1.254/ 

Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the 
four LAN ports when connecting to a PC or an office/home 
network of 10Mbps or 100Mbps. 

Connect the supplied RJ-11 (telephone) cable to this port when 
connecting to the ADSL/telephone network. 

Power ON/OFF switch. 

 

 The detail instruction in Emergency/Failure Recovery Button 

1. Recovery procedures for non-working routers (e.g. after a failed firmware upgrade flash): 

Hold the Emergency/Failure Recovery Button on the back of the modem in. Keep this button 

held in and turn on the modem. Once the lights on the modem have stopped flashing, 

release the Emergency/Failure Recovery Button. The modem's emergency-reflash web 

image to restore the modem to a functional state. Please note that the modem will only 

respond via its web interface at this address, and will not respond to ping requests from your 

PC or to telnet connections. 

 

2. Recovery procedures for a lost web interface password: 

After turning the router on press the Emergency/Failure Recovery Button on the back of the 

modem, and hold the button in until all lights on the modem flash and it reboots with factory 

default settings. The login will be reset to admin and the password will be reset to admin, and 

the modem will be accessible via its default IP address at 

 

Before powered on the router to enter the recovery process. please  

configure the IP address of the PC as 192.168.1.1 and process step by 

step. 

1. Power the router off. 

2. Hold the " Emergency/Failure Recovery Button”. 

3. Power on the router. Then Router's IP will reset to Default (Say 

192.168.1.254) 

4. Download the firmware.