Bay Technical Associates 5218H 사용자 설명서
By responding to the Enter Request: message at the end of the main
configuration menu (see
configuration menu (see
Section 6.1) with "5" (Set Control Character),
you may change the control character.
WARNING: BayTech advises you to log your new control character. If
it is forgotten, you will not be able to control the unit or access the
configuration mode.
it is forgotten, you will not be able to control the unit or access the
configuration mode.
CONTROL
CHARACTER____________ DATE______ BY___
CHARACTER____________ DATE______ BY___
CONTROL
CHARACTER____________ DATE______ BY___
CHARACTER____________ DATE______ BY___
The multiport will respond with:
Current Control Character is...............14H
Enter Control Character in Hex.............:
Enter Control Character in Hex.............:
You may now enter the new control character that you want in HEX
(00 to 7F Hex). For example, if you enter "
(00 to 7F Hex). For example, if you enter "
15 " (Control-U), the
multiport will respond with:
Current Control Character is...............15H
Save Changes Permanently? (Y/N):
Save Changes Permanently? (Y/N):
If you answer "
Y" (yes), the new control character will be saved in
non-volatile memory, and the multiport will respond only to that
character. The multiport will respond with:
character. The multiport will respond with:
Are You Sure? (Y/N):
This message gives you a second chance to consider this change and
reminds you to log your new control character. If you answer either
question with "
reminds you to log your new control character. If you answer either
question with "
N" (no), the new control character will be stored in RAM
and lost upon next power-up. The multiport will return to the main
configuration menu (see
configuration menu (see
Section 6.1).