ZyXEL Communications NBG-416N 사용자 설명서
Chapter 4 Modes
NBG-416N User’s Guide
52
4.4 Setting your NBG-416N to Universal Repeater
Mode
Mode
1
Connect your computer to the LAN port of the NBG-416N.
2
The default LAN IP address of the NBG-416N is 192.168.1.1 in router mode
(192.168.1.2 by default in non-router mode). In router mode, the NBG-416N can
assign your computer an IP address, so you must set your computer to get an IP
address automatically (computer factory default) or give it a fixed IP address in
the range between 192.168.1.3 and 192.168.1.254.
(192.168.1.2 by default in non-router mode). In router mode, the NBG-416N can
assign your computer an IP address, so you must set your computer to get an IP
address automatically (computer factory default) or give it a fixed IP address in
the range between 192.168.1.3 and 192.168.1.254.
3
After you’ve set your computer’s IP address, open a web browser such as Internet
Explorer and type the IP address of the NBG-416N as the web address in your web
browser.
Explorer and type the IP address of the NBG-416N as the web address in your web
browser.
4
Log into the Web Configurator. See the
how to do this.
5
Go to Maintenance > Sys OP Mode > General and select Universal Repeater.
Figure 33 Maintenance > Sys OP Mode > Universal Repeater
6
A pop-up window window appears providing information on this mode. Click OK in
the pop-up message window. Click Apply. Your NBG-416N is now in Universal
Repeater mode.
the pop-up message window. Click Apply. Your NBG-416N is now in Universal
Repeater mode.
Note: Wait while the NBG-416N restarts, then log in to the Web Configurator again.