ZyXEL Communications NBG-417N 사용자 설명서
Chapter 16 Bandwidth Management
NBG-417N User’s Guide
141
16.5.2 User Defined Service Rule Configuration
If you want to edit a bandwidth management rule for specific protocols on an IP or IP range, click
the Edit icon in the Bandwidth Allocation table of the Advanced screen. The following screen
displays.
the Edit icon in the Bandwidth Allocation table of the Advanced screen. The following screen
displays.
Figure 85
Management > Bandwidth MGMT > Advanced: Allocation Setup
The following table describes the labels in this screen
.
Table 57
Management > Bandwidth MGMT > Advanced: Allocation Setup
LABEL
DESCRIPTION
Active
Select this check box to turn on this bandwidth management rule.
Direction
Enter whether you want to apply the rule to uplink or downlink traffic.
To LAN applies bandwidth management to traffic from WAN to LAN/WLAN (i.e.,
downlink).
downlink).
To WAN applies bandwidth management to traffic from LAN/WLAN to WAN (i.e.,
uplink).
uplink).
Select Both applies bandwidth management to traffic that the NBG-417N
forwards to both the LAN and the WAN.
forwards to both the LAN and the WAN.
LAN IP Range
Specify the range of IP addresses for which the bandwidth management rule
applies.
applies.
Protocol
Select the protocol (TCP, UDP, SMTP, HTTP, POP3, FTP or ALL) for which the
bandwidth management rule applies.
bandwidth management rule applies.
Port Range
Enter the range of ports for which the bandwidth management rule applies.
Policy
Select Max or Min and specify the maximum or minimum bandwidth allowed for
the rule in bits per second in the field below.
the rule in bits per second in the field below.
Rate (bps)
Type or select the maximum or minimum bandwidth allowed (refer to the field
above) for the rule in bits per second.
above) for the rule in bits per second.
If you type the amount of bandwidth, the selection automatically becomes User
Defined. If you select the amount of bandwidth, the field automatically displays
the value in Kbps.
Defined. If you select the amount of bandwidth, the field automatically displays
the value in Kbps.
Apply
Click Apply to save your customized settings.
Reset
Click Reset to begin configuring this screen afresh.