ZyXEL Communications NWA1100-N 사용자 설명서
Chapter 8 Wireless Security Screen
NWA1100-N User’s Guide
89
8.4.1 Security: WEP
Use this screen to use WEP as the security mode for your NWA. Select WEP in the Security Mode
field to display the following screen.
field to display the following screen.
Figure 36
Security: WEP
The following table describes the labels in this screen.
Table 22
Security: WEP
LABEL
DESCRIPTION
Profile Name
This is the name that identifying this profile.
Security Mode
Choose WEP in this field.
Authentication
Type
Type
Select Open or Shared Key from the drop-down list box.
Data Encryption
Select 64-bit WEP, 128-bit WEP or 152-bit WEP to enable data encryption.
Passphrase
Enter the passphrase or string of text used for automatic WEP key generation on
wireless client adapters.
wireless client adapters.
Generate
Click this to get the keys from the Passphrase you entered.
Key 1 to
Key 4
The WEP keys are used to encrypt data. Both the NWA and the wireless stations
must use the same WEP key for data transmission.
must use the same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal
characters ("0-9", "A-F").
characters ("0-9", "A-F").
If you chose 152-bit WEP, then enter 16 ASCII characters or 32 hexadecimal
characters ("0-9", "A-F").
characters ("0-9", "A-F").
You must configure all four keys, but only one key can be activated at any one
time.
time.
Apply
Click Apply to save your changes.