ZyXEL Communications GS-1524 사용자 설명서
GS-1524/GS-1548 User’s Guide
55
C
H A P T E R
6
Port Settings
This chapter describes how to view and configure the port settings on the Switch.
6.1 Port Status
Use this screen to view Switch port settings. Click Port in the navigation panel to display the
Port Status screen.
Port Status screen.
Figure 29 Port Status
The following table describes the labels in this screen.
Table 8 Port Status
LABEL
DESCRIPTION
Refresh
Click this to update the PORT Status screen.
Port
This identifies the Ethernet port. Click a port number to display the Port
Configuration screen (refer to
Link Status
This field displays the link status of the port. Up, if the port is enabled and active or
Down, if the port is disabled or not connected to any device.
Speed Duplex
This field displays the speed either 10Mbps, 100Mbps or 1000Mbps and the duplex
mode Full or Half.
Flow Control
Enables access to buffering resources for the port thus ensuring lossless operation
across network switches. This field displays either Enabled or Disabled.
PVID
The PVID field specifies what tag the incoming untagged frames receive on that port
so that the frames are forwarded to the VLAN group that the tag defines.