ZyXEL Communications wireless active fiber router 사용자 설명서
Chapter 4 Wireless LAN
FSG1100HN User’s Guide
34
built-in to the FSG1100HN must have the same SSID.
Data Rate
Select the data transmission rate. For best performance, it is
strongly suggested to choose the default, Auto.
strongly suggested to choose the default, Auto.
Broadcast SSID
Enable or disable the broadcasting of the FSG1100HN’s SSID. If
this is disabled, the SSID in the outgoing beacon frame will be
hidden. This prevents a station from obtaining the SSID through
scanning using a site survey tool.
this is disabled, the SSID in the outgoing beacon frame will be
hidden. This prevents a station from obtaining the SSID through
scanning using a site survey tool.
Block Intra-BSS
Traffic
Traffic
Enable this feature to prevent clients on each WLAN from being
able to ping each other.
able to ping each other.
Active Client List
Click the Show button to display the Active Wireless Client
Table window for AP1, AP2, AP3, or AP4.
Table window for AP1, AP2, AP3, or AP4.
Apply
Click Apply to save your changes back to the FSG1100HN.
Refresh
Click Refresh to begin configuring this screen afresh.
Close
Click Close to close this pop-up window.
4.4.2 Active Wireless Client Table
The Active Wireless Client Table displays all current associated wireless clients.
Click Wireless > Basic Settings > Show Active Clients to open the Active Wireless
Client Table screen.
Wireless > Basic Settings > Show Active Clients
The following table describes the active wireless client labels in this screen
Wireless > Basic Settings > Show Active Clients
LABEL
DESCRIPTION
MAC Address
The MAC address of the wireless client.
Mode
The current mode of the wireless client.
Tx Packet
The number of packets transmitted by this wireless client.
Rx Packets
The number of packets received by this wireless client.
Tx Rate (Mbps)
The packet transmitted rate in Mbps.
Power Saving
The current power saving setting on this wireless client.
Expired Time(s)
The time before this wireless client times out.
Refresh
Click Refresh to begin configuring this screen afresh.
Close
Click Close to close this pop-up window.