ZyXEL Communications Wireless Gateway Series 사용자 설명서

ZyAIR Wireless Gateway Series User’s Guide 

 

SUA/NAT 

          9-1 

This chapter discusses how to configure SUA/NAT on the ZyAIR. 

NAT (Network Address Translation - NAT, RFC 1631) is the translation of the IP address of a host in a 
packet. For example, the source address of an outgoing packet, used within one network is changed to a 
different IP address known within another network.  

Inside/outside denotes where a host is located relative to the ZyAIR. For example, the computers of your 
subscribers are the inside hosts, while the web servers on the Internet are the outside hosts.  
Global/local denotes the IP address of a host in a packet as the packet traverses a router. For example, the 
local address refers to the IP address of a host when the packet is in the local network, while the global 
address refers to the IP address of the host when the same packet is traveling in the WAN side.  
Note that inside/outside refers to the location of a host, while global/local refers to the IP address of a host 
used in a packet. Thus, an inside local address (ILA) is the IP address of an inside host in a packet when the 
packet is still in the local network, while an inside global address (IGA) is the IP address of the same inside 
host when the packet is on the WAN side. The following table summarizes this information. 

Inside 

This refers to the host on the LAN. 

Outside 

This refers to the host on the WAN. 

Local 

This refers to the packet address (source or destination) as the packet travels on the LAN. 

Global 

This refers to the packet address (source or destination) as the packet travels on the WAN.