ZyXEL Communications Wireless Gateway Series 사용자 설명서

ZyAIR Wireless Gateway Series User’s Guide 

13-10  

Remote 

Management 

 

Set Community 

Enter the Set community, which is the password for incoming Set requests from the 
management station.  

Trusted Host 

If you enter a trusted host, your ZyAIR will only respond to SNMP messages from this 
address. A blank (default) field means your ZyAIR will respond to all SNMP messages 
it receives, regardless of source. 

Trap  

Community 

Type the trap community, which is the password sent with each trap to the SNMP 
manager.  

Destination 

Type the IP address of the station to send your SNMP traps to. 

SNMP 

Server Port 

You may change the server port number for a service if needed, however you must 
use the same port number in order to use that service for remote management.  

Server Access 

Select the interface(s) through which a computer may access the ZyAIR using this 
service.  

Secured Client 
IP Address 

A secured client is a “trusted” computer that is allowed to communicate with the ZyAIR 
using this service.  

Select All to allow any computer to access the ZyAIR using this service. 

Choose Selected to just allow the computer with the IP address that you specify to 
access the ZyAIR using this service. 

Apply

 

Click Apply to save your changes back to the ZyAIR.

 

Reset

 

Click Reset to begin configuring this screen afresh.

 

Use DNS (Domain Name System) to map a domain name to its corresponding IP address and vice versa, for 
example, the IP address of www.zyxel.com is 204.217.0.2. Refer to the Internet Access chapter for more 
information. 

To change your ZyAIR’s DNS settings, click ADVANCED, REMOTE MGNT and then the DNS tab. The 
screen appears as shown.