ZyXEL Communications ZLD 사용자 설명서
Chapter 40 Logs
ZyWALL (ZLD) CLI Reference Guide
318
40.1.1 Log Entries Commands
This table lists the commands to look at log entries.
40.1.2 System Log Commands
This table lists the commands for the system log settings.
Table 187
logging Commands: Log Entries
COMMAND
DESCRIPTION
show logging entries [priority pri] [category
module_name] [srcip ip] [srcip6 ipv6_addr]
[dstip ip] [dstip6 ipv6_addr] [service
service_name] [begin <1..512> end <1..512>]
[keyword keyword] [srciface interface_name]
[dstiface interface_name] [protocol protocol]
Displays the specified entries in the system log.
pri
: alert | crit | debug | emerg | error | info | notice | warn
keyword
: You can use alphanumeric and
()+/:=?!*#@$_%-
characters, and it can be up to 63 characters long. This searches
the message, source, destination, and notes fields.
the message, source, destination, and notes fields.
show logging entries field field [begin
<1..512> end <1..512>]
Displays the specified fields in the system log.
field
: time | msg | src | dst | note | pri | cat | all
Table 188
logging Commands: System Log Settings
COMMAND
DESCRIPTION
show logging status system-log
Displays the current settings for the system log.
logging system-log category module_name
{disable | level normal | level all}
Specifies what kind of information, if any, is logged in the system log and
debugging log for the specified category.
debugging log for the specified category.
[no] logging system-log suppression
interval <10..600>
Sets the log consolidation interval for the system log. The no command
sets the interval to ten.
sets the interval to ten.
[no] logging system-log suppression
Enables log consolidation in the system log. The no command disables log
consolidation in the system log.
consolidation in the system log.
[no] connectivity-check continuous-log
activate
Has the ZyWALL generate a log for each connectivity check. The no
command has the ZyWALL only log the first connectivity check.
command has the ZyWALL only log the first connectivity check.
show connectivity-check continuous-log
status
Displays whether or not the ZyWALL generates a log for each connectivity
check.
check.
clear logging system-log buffer
Clears the system log.