ZyXEL Communications 5 Series 사용자 설명서
Chapter 9 WAN Screens
ZyWALL 5/35/70 Series User’s Guide
197
9.5 The Traffic Redirect Screen
Traffic redirect forwards WAN traffic to a backup gateway when the ZyWALL cannot
connect to the Internet through its normal gateway. Connect the backup gateway on the WAN
so that the ZyWALL still provides firewall protection for the LAN.
connect to the Internet through its normal gateway. Connect the backup gateway on the WAN
so that the ZyWALL still provides firewall protection for the LAN.
Figure 109 Traffic Redirect WAN Setup
IP alias allows you to avoid triangle route security issues when the backup gateway is
connected to the LAN or DMZ. Use IP alias to configure the LAN into two or three logical
networks with the ZyWALL itself as the gateway for each LAN network. Put the protected
LAN in one subnet (Subnet 1 in the following figure) and the backup gateway in another
subnet (Subnet 2). Configure a LAN to LAN/ZyWALL firewall rule that forwards packets
from the protected LAN (Subnet 1) to the backup gateway (Subnet 2).
connected to the LAN or DMZ. Use IP alias to configure the LAN into two or three logical
networks with the ZyWALL itself as the gateway for each LAN network. Put the protected
LAN in one subnet (Subnet 1 in the following figure) and the backup gateway in another
subnet (Subnet 2). Configure a LAN to LAN/ZyWALL firewall rule that forwards packets
from the protected LAN (Subnet 1) to the backup gateway (Subnet 2).
Actions when
over budget
over budget
Specify the actions the ZyWALL takes when the time or data limit is exceeded.
Select Log to create a log.
Select Alert to create an alert. This option is available only when you select Log.
If you select Log, you can also select recurring every to have the ZyWALL send a
log (and alert if selected) for this event periodically. Specify how often (from 1 to
65535 minutes) to send the log (and alert if selected).
Select Allow to permit new 3G connections or Disallow to drop/block new 3G
connections.
Select Keep to maintain the existing 3G connection or Drop to disconnect it.
You cannot select Allow and Drop at the same time.
If you select Disallow and Keep, the ZyWALL allows you to transmit data using
the current connection, but you cannot build a new connection if the existing
connection is disconnected.
Select Log to create a log.
Select Alert to create an alert. This option is available only when you select Log.
If you select Log, you can also select recurring every to have the ZyWALL send a
log (and alert if selected) for this event periodically. Specify how often (from 1 to
65535 minutes) to send the log (and alert if selected).
Select Allow to permit new 3G connections or Disallow to drop/block new 3G
connections.
Select Keep to maintain the existing 3G connection or Drop to disconnect it.
You cannot select Allow and Drop at the same time.
If you select Disallow and Keep, the ZyWALL allows you to transmit data using
the current connection, but you cannot build a new connection if the existing
connection is disconnected.
Actions when
over % of time
budget or % of
data budget
over % of time
budget or % of
data budget
Specify the actions the ZyWALL takes when the specified percentage of time
budget or data limit is exceeded. Enter a number from 1 to 99 in the percentage
fields. If you change the value after you configure and enable budget control, the
ZyWALL resets the statistics.
Select Log to create a log.
Select Alert to create an alert. This option is available only when you select Log.
If you select Log, you can also select recurring every to have the ZyWALL send a
log (and alert if selected) for this event periodically. Specify how often (from 1 to
65535 minutes) to send the log (and alert if selected).
budget or data limit is exceeded. Enter a number from 1 to 99 in the percentage
fields. If you change the value after you configure and enable budget control, the
ZyWALL resets the statistics.
Select Log to create a log.
Select Alert to create an alert. This option is available only when you select Log.
If you select Log, you can also select recurring every to have the ZyWALL send a
log (and alert if selected) for this event periodically. Specify how often (from 1 to
65535 minutes) to send the log (and alert if selected).
Apply
Click Apply to save your changes back to the ZyWALL.
Reset
Click Reset to begin configuring this screen afresh.
Table 45 NETWORK > WAN > 3G (WAN 2) (continued)
LABEL
DESCRIPTION