ZyXEL Communications ZyXEL G-1000 v2 사용자 설명서
ZyXEL G-1000 v2 User’s Guide
64
Chapter 5 IP and DNS Screens
5.2 Configuring DNS
To configure DNS settings, click Network > IP > Advanced. The screen appears as shown.
Figure 23 Network: Advanced
The following table describes the labels in this screen.
IP Address
Enter the IP address of your G-1000 v2 in dotted decimal notation.
IP Subnet Mask Type the subnet mask.
Gateway IP
Address
Type the IP address of the gateway. The gateway is an immediate neighbor of your
G-1000 v2 that will forward the packet to the destination. On the LAN, the gateway
must be a router on the same segment as your G-1000 v2; over the WAN, the
gateway must be the IP address of one of the remote nodes.
Apply
Click Apply to save your changes back to the G-1000 v2.
Reset
Click Reset to reload the previous configuration for this screen.
Table 23 Network: Internet Connection
LABEL
DESCRIPTION
Table 24 Network: Advanced
LABEL
DESCRIPTION
DNS Servers
First DNS
Server
Second DNS
Second DNS
Server
Third DNS
Third DNS
Server
Select From ISP if your DHCP server dynamically assigns DNS server information
(and the G-1000 v2's Ethernet IP address). The field to the right displays the (read-
only) DNS server IP address that the DHCP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the DNS
Select User-Defined if you have the IP address of a DNS server. Enter the DNS
server's IP address in the field to the right. If you chose User-Defined, but leave the
IP address set to 0.0.0.0, User-Defined changes to None after you click Apply. If you
set a second choice to User-Defined, and enter the same IP address, the second
User-Defined changes to None after you click Apply.
Select None if you do not want to configure DNS servers. If you do not configure a
Select None if you do not want to configure DNS servers. If you do not configure a
DNS server, you must know the IP address of a machine in order to access it.
The default setting is None.
The default setting is None.