ZyXEL Communications P-660HW-D Series 사용자 설명서

P-660HW-D Series User’s Guide

Chapter 16 Universal Plug-and-Play (UPnP)

212

The following table describes the fields in this screen.

This section shows how to install UPnP in Windows Me and Windows XP.  

Follow the steps below to install the UPnP in Windows Me. 

1 Click Start and Control Panel. Double-click Add/Remove Programs.

2 Click on the Windows Setup tab and select Communication in the Components 

selection box. Click Details.  

Table 87   Configuring UPnP

Active the Universal Plug and 

Play (UPnP) Feature 

Select this check box to activate UPnP. Be aware that anyone could use 

a UPnP application to open the web configurator's login screen without 

entering the ZyXEL device's IP address (although you must still enter 

the password to access the web configurator).

Allow users to make 

configuration changes 

through UPnP

Select this check box to allow UPnP-enabled applications to 

automatically configure the ZyXEL device so that they can communicate 

through the ZyXEL device, for example by using NAT traversal, UPnP 

applications automatically reserve a NAT forwarding port in order to 

communicate with another UPnP enabled device; this eliminates the 

need to manually configure port forwarding for the UPnP enabled 

application. 

Allow UPnP to pass through 

Firewall

Select this check box to allow traffic from UPnP-enabled applications to 

bypass the firewall. 
Clear this check box to have the firewall block all UPnP application 

packets (for example, MSN packets). 

Apply

Click Apply to save the setting to the ZyXEL device.

Cancel

Click Cancel to return to the previously saved settings.