ZyXEL Communications 1001H 사용자 설명서

11-25

Field

Use Time Server when
Bootup=

Enter the time service protocol that your timeserver will send when the
Prestige powers up. Choices are Daytime (RFC 867), Time (RFC-868),
NTP (RFC-1305) and None. The main differences between them are the
format, e.g., the Daytime (RFC 867) format is day/month/date/year/time
zone of the server while the Time (RFC-868) format gives a 4-byte
integer giving the total number of seconds since 1/1/1970 at 0:0:0. The
NTP (RFC-1305) format is similar. Not all timeservers support all
protocols, so you may have to check with your ISP/network administrator
or use trial and error to find a protocol that works. If you select None
(this is the default value), you can enter the time manually but each time
the system is booted, the time & date will be reset to 1970-1-1 0:0:0.

Time Server IP
Address=

Enter the IP address of the your timeserver. Check with your
ISP/network administrator if you are unsure of this information.

Current Time:

New Time

Enter the new time in hour, minute and second format.

Current Date:

New Date

Enter the new date in year, month and date format.

Time Zone= GMT+0800

Press the [SPACE BAR] to set the time difference between your time
zone and Greenwich mean Time (GMT). Be aware if/when daylight
savings time alters this time difference for your time zone.

Once you have filled in the new time and date, press [Enter] to save the setting and press [Esc] to
return to Menu 24.