ZyXEL Communications 1001H 사용자 설명서
P100IH ISDN Router
12-2
Call Scheduling
take precedence over set 2, 3 and 4 as it is applied first. Set 2 will take precedence over set 3 and 4, and so
on.
on.
You can design up to 12 schedule sets but you can only apply up to 4 schedule sets for a remote node.
To delete a schedule set, enter the set number and press the [Space Bar] (or delete)
in the Edit Name field to delete the set name.
To setup a schedule set select the schedule set you want to setup from Menu 26 (no. 1-12) and press
[Enter] to see Menu 26.1 - Schedule Set Setup as shown next.
[Enter] to see Menu 26.1 - Schedule Set Setup as shown next.
Figure 12-3 Schedule Set Setup
The action for a remote node configured with a schedule set is Forced On, Forced Down, Enable Dial-
On-Demand, or Disable Dial-On-Demand. Forced On means that the connection is maintained
whether or not there is a demand call on the line and persist for the time period specified in the Duration
field. Forced Down means that the connection is blocked whether or not there is a demand call on the
line. Enable Dial-On-Demand means that this schedule permits a demand call on the line. Disable
Dial-On-Demand means that this schedule prevents a demand call on the line. If a connection has been
already established, it will not drop it. Once the connection is dropped manually or it times out, then that
remote node can't be triggered up until the end of the Duration.
On-Demand, or Disable Dial-On-Demand. Forced On means that the connection is maintained
whether or not there is a demand call on the line and persist for the time period specified in the Duration
field. Forced Down means that the connection is blocked whether or not there is a demand call on the
line. Enable Dial-On-Demand means that this schedule permits a demand call on the line. Disable
Dial-On-Demand means that this schedule prevents a demand call on the line. If a connection has been
already established, it will not drop it. Once the connection is dropped manually or it times out, then that
remote node can't be triggered up until the end of the Duration.
Menu 26.1 - Schedule Set Setup
Active= Yes
Start Date (mm/dd/yyyy) = 1990-1-1
How Often= Once
Once:
Date (mm/dd/yyyy) = 1990-1-2
Weekdays:
Sunday= N/A
Monday= N/A
Tuesday= N/A
Wednesday= N/A
Thursday= N/A
Friday= N/A
Saturday= N/A
Start Time (hh : mm) = 10 : 20
Duration (hh : mm) = 01 :00
Action= Forced On
Start Date (mm/dd/yyyy) = 1990-1-1
How Often= Once
Once:
Date (mm/dd/yyyy) = 1990-1-2
Weekdays:
Sunday= N/A
Monday= N/A
Tuesday= N/A
Wednesday= N/A
Thursday= N/A
Friday= N/A
Saturday= N/A
Start Time (hh : mm) = 10 : 20
Duration (hh : mm) = 01 :00
Action= Forced On
Press ENTER to Confirm or ESC to Cancel: