ZyXEL Communications 1600 사용자 설명서

14-9

14.5  Boot Module Commands

Prestige boot module commands are shown below. For ATBAx, x denotes the number preceding the colon to give
the speed following the colon in the list of numbers that follows; e.g. ATBA3 will give a baud of 9.6 Kbps. ATSE
displays the seed that is used to generate a password to turn on the debug flag in the firmware. The ATSH
command shows product related information such as boot module version, vendor name, product model, RAS code
revision, etc.

14.6  Command Interpreter Mode

This option allows you to enter the command line interpreter mode. A CLI/CI (Command Line Interface) is a user
interface to a computer's operating system or an application program in which the user responds to a visual prompt
by typing in a command on a specified line, receives a response back from the system, and then enters another
command, and so forth.

The list of valid commands can be found by typing help or ? at the command prompt. To exit the CI mode and
return to the menu mode, type exit.

======= Debug Command Listing =======
athe
======= Debug Command Listing =======
AT            just answer OK
ATHE          print help
ATBAx         change baudrate. 1:38.4k, 2:19.2k, 3:9.6k
4:57.6k 5:115.2k
ATENx(,y)     set BootExtension Debug Flag (y=password)
ATSE          show the seed of password generator
ATTI(h,m,s)   change system time to hour:min:sec or show
current time
ATDA(y,m,d)   change system date to year/month/day or show
current date
ATDS          dump RAS stack
ATDT          dump Boot Module Common Area
ATDUx,y       dump memory contents from address x for
length y
ATRBx         display the  8-bit value of address x
ATRBx         display the  8-bit value of address x
ATRWx         display the 16-bit value of address x
ATRLx         display the 32-bit value of address x
ATGOx         run program at addr x or boot ZyNOS
ATGR          boot ZyNOS
ATGT          run Hardware Test Program
ATRTw,x,y(,z) RAM Test level w, from address x to y (z
iterations)
ATCB          copy from FLASH ROM to working buffer
ATSH          dump manufacturer related data in ROM
ATDOx,y       download from address x for length y to PC
via XMODEM
ATTD          download configuration to PC via XMODEM

< press any key to continue >
ATUR          upload RAS code to flash ROM
ATUR3         upload RAS configuration file
ATLC          upload RAS configuration file
ATLOa,b,c,d   Int/Trap Log Cmd
ATGM          boot ZyNOS in main block
ATGB          boot ZyNOS in backup block
ATUM          upload RAS code to main block
ATUB          upload RAS code to backup block
ATSW          switch main block and backup block