ZyXEL Communications 1600 사용자 설명서
Prestige 1600 Universal Access Concentrator
WAN Port Setup
4-1
Chapter 4
WAN Port Setup
This section describes setting up your WAN port including Frame Relay.
Select option 2 from the Main Menu by typing 2 at the menu selection number prompt. You will see a screen as
shown next.
shown next.
Figure 4-1 Menu 2 - WAN Port Setup
Table 4-1 WAN Setup Menu Fields
Field
Description
Example
Clock Source
The device connected to the WAN port controls timing. The
P1600 currently only supports an external clock source.
P1600 currently only supports an external clock source.
External
Port Speed
Set by External Device
N/A
Edit Frame Relay
Setup
Setup
To configure the WAN port for frame relay move the cursor
to the Edit Frame Relay Setup= field, press the
[SPACEBAR] once to display Yes and then press
[ENTER]. This takes you to Menu 2.1.2 - Frame Relay
Setup shown ahead.
to the Edit Frame Relay Setup= field, press the
[SPACEBAR] once to display Yes and then press
[ENTER]. This takes you to Menu 2.1.2 - Frame Relay
Setup shown ahead.
4.1
Configuring The WAN Port For PPP over HDLC
The following diagram depicts the configuration scenario for running PPP over HDLC (High-level Data Link
Control).
Control).
Menu 2 - WAN Port Setup
Clock Source = External
Port Speed = N/A
Port Speed = N/A
Edit Frame Relay Setup= No
Press Enter to Confirm or ESC to Cancel:
Only change the default option
(No) if you wish to configure the
WAN port for frame relay.
(No) if you wish to configure the
WAN port for frame relay.