ZyXEL Communications 1600 사용자 설명서

10-10 

                    

The following table describes the fields in the Device Filter Rule Menu.

Filter #

This is the filter set, filter rule co-ordinates, i.e., 2,3
refers to the second filter set and the third filter rule of
that set.

Filter Type

Press [SPACE BAR] to toggle between types of rules.
Parameters displayed below each type will be different.

Active

Select Yes to turn on the filter rule.

Offset

Enter the starting byte of the data portion in the packet
that you wish to compare. The range for this field is
from 0 to 255.

Length

Enter the byte count of the data portion in the packet
that you wish to compare.  The range for this field is 0
to 8.

Mask

Enter the mask (in Hexadecimal) to apply to the data
portion before comparison.

Value

Enter the value (in Hexadecimal) to compare with the
data portion.

More

If Yes, a matching packet is passed to the next filter
rule before an action is taken; else the packet is
disposed of according to the action fields.

If More is Yes, then Action Matched and Action Not
Matched will be N/A.

Log

Select the logging option from the following:

None - No packets will be logged.

Action Matched - Only packets that match the rule
parameters will be logged.

Action Not Matched - Only packets that do not match
the rule parameters will be logged.

Menu 21.1.1 - Device Filter Rule

Filter #: 1,1
Filter Type= Device Filter Rule
Active= No
Offset= 0
Length= 0
Mask= N/A
Value= N/A
More= No           Log= None
Action Matched= Check Next Rule
Action Not Matched= Check Next Rule

Press ENTER to Confirm or ESC to Cancel: