ZyXEL Communications 2602HW Series 사용자 설명서

Prestige 2602HW Series User’s Guide

Chapter 22 Introducing the SMT

267

The login screen appears after you press [ENTER], prompting you to enter the password, as 
shown next.

For your first login, enter the default password "

1234

". As you type the password, the screen 

displays an asterisk "

*

" for each character you type.

Please note that if there is no activity for longer than five minutes after you log in, your 
Prestige will automatically log you out. 

Figure 129   Login Screen 

The SMT (System Management Terminal) is the interface that you use to configure your 
Prestige. 

Several operations that you should be familiar with before you attempt to modify the 
configuration are listed in the table below.

Enter Password : ****

Table 85   Navigating the SMT Interface

Move down to 

another menu

[ENTER]

To move forward to a submenu, type in the number of the 

desired submenu and press [ENTER].

Move up to a 

previous menu

[ESC]

Press [ESC] to move back to the previous menu.

Move to a hidden 

menu

Press [SPACE 

BAR] to change 

No to Yes then 

press [ENTER].

Fields beginning with "Edit" lead to hidden menus and have a 

default setting of No. Press [SPACE BAR] once to change No 

to Yes, then press [ENTER] to go to the  "hidden" menu.

Move the cursor

[ENTER] or [UP]/

[DOWN] arrow 

keys.

Within a menu, press [ENTER] to move to the next field. You 

can also use the [UP]/[DOWN] arrow keys to move to the 

previous and the next field, respectively.

Entering 

information

Type in or press 

[SPACE BAR], 

then press 

[ENTER].

You need to fill in two types of fields. The first requires you to 

type in the appropriate information. The second allows you to 

cycle through the available choices by pressing [SPACE BAR].

Required fields

<

?

 > or 

All fields with the symbol <?> must be filled in order to be able 

to save the new configuration.
All fields with ChangeMe must not be left blank in order to be 

able to save the new configuration.

N/A fields

<N/A>

Some of the fields in the SMT will show a <N/A>. This symbol 

refers to an option that is Not Applicable.