ZyXEL Communications 2602HW Series 사용자 설명서

Prestige 2602HW Series User’s Guide

282

Chapter 25 Menu 3 LAN Setup

• For TCP/IP Ethernet setup refer to 

.

• For bridging Ethernet setup refer to 

.

Use menu 3.2 to configure your Prestige for TCP/IP.

To edit menu 3.2, enter 3 from the main menu to display Menu 3 — LAN Setup. When menu 
3 appears, press 2 and press [ENTER] to display Menu 3.2 — TCP/IP and DHCP Ethernet 
Setup, as shown next

:

Figure 137   Menu 3.2 TCP/IP and DHCP Ethernet Setup

Follow the instructions in the following table on how to configure the DHCP fields.

    

               Menu 3.2 - TCP/IP and DHCP Setup
           DHCP Setup
             DHCP= Server
             Client IP Pool Starting Address= 192.168.1.33
             Size of Client IP Pool= 32
             Primary DNS Server= 0.0.0.0
             Secondary DNS Server= 0.0.0.0
             Remote DHCP Server= N/A
           TCP/IP Setup:
             IP Address= 192.168.1.1
             IP Subnet Mask= 255.255.255.0
             RIP Direction= None
               Version= N/A
             Multicast= None
             IP Policies=
             Edit IP Alias= No
           Press ENTER to Confirm or ESC to Cancel:

Table 93   DHCP Ethernet Setup

DHCP Setup 

DHCP

If set to Server, your Prestige can assign IP addresses, an IP default 

gateway and DNS servers to Windows 95, Windows NT and other systems 

that support the DHCP client.  
If set to None, the DHCP server will be disabled. 
If set to Relay, the Prestige acts as a surrogate DHCP server and relays 

DHCP requests and responses between the remote server and the clients.  

Enter the IP address of the actual, remote DHCP server in the Remote 

DHCP Server in this case.
When DHCP server is used, the following items need to be set:

Client IP Pool Starting 

Address

This field specifies the first of the contiguous addresses in the IP address 

pool.