ZyXEL Communications 2602HW Series 사용자 설명서

Prestige 2602HW Series User’s Guide

Chapter 3 Wizard Setup

73

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual 
clients to obtain TCP/IP configuration from a server. You can configure the Prestige as a 
DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP 
configuration for the clients. If you turn DHCP service off, you must have another DHCP 
server on your LAN, or else the computer must be manually configured. 

The Prestige is pre-configured with a pool of 32 IP addresses starting from 192.168.1.33 to 
192.168.1.64 for the client machines.  This leaves 31 IP addresses, 192.168.1.2 to 
192.168.1.32 (excluding the Prestige itself which has a default IP of 192.168.1.1) for other 
server machines, for example, server for mail, FTP, telnet, web, etc., that you may have.

Verify the settings in the screen shown next. To change the LAN information on the Prestige, 
click Change LAN Configurations. Otherwise click Save Settings to save the configuration 
and skip to the section 3.13. 

Authentication 

Password

Type the password associated with the user name above. You can use up to 

95 ASCII Extended set characters.

Send Caller ID

Select this check box to show identification information when you make VoIP 

phone calls. Clear the check box to not show identification information when 

you make VoIP phone calls.

Back

Click Back to go back to the previous screen.

Next

Click Next to continue to the next wizard screen.

Table 9   Internet Access Wizard Setup: Voice Configuration (continued)