Technicolor - Thomson 210i 사용자 설명서

Basic Setup (Setup First) 
This group includes Administrator Password Setup, Ethernet TCP/IP and DHCP 
Setup, and ISDN Setup. 
 

On first setup the router requires no password. However, for security reasons, we strongly 
recommend that you set an administrator password for the router. If you do not set a 
password for the router, any user can access the setting of the router and make changes 
randomly from local network or the Internet. 
 
Click Administrator Password Setup, the following screen will open. 

 

♦ 

Old Password – If this is the first time you enter this menu, leave this field 
blank. 

♦ 

New Password – Enter an administrator password. 

♦ 

Retype New Password – Type the password again to confirm. 

The Router has four Ethernet ports for connecting to the local Ethernet network and 
external broadband device (i.e. DSL modem/router or Cable modem). There are two sets 
of IP address settings for the Ethernet. The first IP address/netmask is for private users or 
NAT users, and the second IP address/netmask is for public users or pure router (not 
NAT) user. To allow access of public users you need to subscribe a globally reachable 
subnet from your ISP. 
 
For example, for some ISDN dial-up access, the ISP will assign a few public IP addresses 
for your local network usage. You could use one IP address for your router; the second