Technicolor - Thomson 580 사용자 설명서

Internet Access in No Time

E-DOC-CTC-20050429-0061 v1.0

3.1.1 Wireless Setup

Wireless client

adapters

For a wireless connection to your Wi-Fi certified SpeedTouch™, you will need a 
wireless 802.11 b/g compatible client adapter.
As wireless client adapter, you can use a provided SpeedTouch™110g CardBus, a 
provided SpeedTouch™120g USB adapter (with cable), you can plug a provided 
SpeedTouch™121g adapter directly into your computer’s USB port (without cable) or 
any other Wi-Fi certified WLAN client.

Installing your wireless

client adapter

The Home Install Wizard will invite you to plug in the wireless client adapter.
Proceed as follows:

Plug in the wireless client adapter. The hardware is being installed.

Enter your SpeedTouch™’s serial number. This 13 digit key is printed on the 
bottom label of your SpeedTouch™. Then click Next.

In a progress window you can follow the setup of the wireless connection to 
your SpeedTouch™.

Continue with 

To be able to install hardware on a MS Windows 2000 or a MS Windows XP 
operating system, you need administrative rights on your computer.

If you use a SpeedTouch™110g/120g/121g adapter, the SpeedTouch™ 
Wireless Client Manager, an alternative to the Wireless Zero 
Configuration (WZC) in Windows XP, will be installed. If you’re working 
on Windows XP and prefer to work with the WZC, see 

 to switch back to WZC.

With the provided SpeedTouch™110g/120g/121g adapter, the client 
manager will be configured correctly for secure WLAN connectivity to 
the SpeedTouch™. Also for a third party WLAN client on MS Windows 
XP with Service Pack 2, the WLAN configuration will be correctly done 
via the WZC. In other cases you will need to configure the client 
manager of your WLAN client without help of the wizard.