Alcatel Carrier Internetworking Solutions Switch/Router 사용자 설명서

Page 11-7

For field descriptions of the device resources column, see Setting Bandwidth Thresholds on 
page 11-3 and Setting Miscellaneous Thresholds on page 11-4 above.

♦ Note ♦ 

When calculating percentages, the health statistics 
cannot display less than one percent. If a single packet 
is sent through a port, for example, the receive 
resource usage is represented as one percent. 

The following section describes the statistics displayed using the 

 command.

The set threshold for this resource. You can set the resource levels using the 

 command. 

See Setting Resource Thresholds on page 11-2 for specific procedures.

The current resource usage. This number is a percentage of the total resource capacity.

The average percent of resource use for the last sixty seconds.

The average percent of resource use for the last sixty minutes.

The maximum percent of resource use for the last sixty minutes.

To view module level statistics, type the 

 command at a system prompt followed by the 

slot number. For example, to view the statistics for a module in slot three, type the following:

The following screen is displayed:

Statistics are displayed as percentages of the total resource capacity, and represent data taken 
from the last sampling interval. If a threshold for a resources was exceeded, then that statistic 
is marked with an asterisk (*). For descriptions of the monitored resources, see Setting Band-
width Thresholds on page 11-3 and Setting Miscellaneous Thresholds on page 11-4 above.