Alcatel Carrier Internetworking Solutions Switch/Router 사용자 설명서

Page 12-17

The following sections describe the fields displayed using the 

 command

. The 

IP

 address of the remote association.

. The local interface address assigned by 

NTP

 to the remote association. If this address is 

, then the local address has yet to be determined.

. The stratum level of the remote peer. If this number is 

, the remote peer has not been 

synchronized.

 The polling interval, in seconds.

. The reachability register of the remote association, in octal format. This number is 

determined by the 

NTP

 algorithm.

. The currently estimated delay of this remote association, in seconds. This time is deter-

mined by the 

NTP

 algorithm.

. The currently estimated offset of this remote association, in seconds. This time is deter-

mined by the 

NTP

 algorithm.

. The currently estimated dispersion of this remote association, in seconds. This time is 

determined by the 

NTP

 algorithm.

The 

 command displays a more detailed version of the 

command with 

a slightly different output than the 

 command. To display a list of peers that includes 

summary information, enter the 

 command at the system prompt. A screen similar 

to the following appears:

This table is identical to the 

 command except for the symbols displayed on the far 

left side. A key for the symbols is provided below:

Indicates that the remote association was cast aside during the false ticker 
detection.

Indicates that the remote association was accepted and not discarded by 
the false ticker detection.

Indicates the remote association the switch is currently synchronizing with.