Alcatel Carrier Internetworking Solutions Switch/Router 사용자 설명서

Page 17-19

2. The following prompt is shown:

Enter the slot and station (port) number for the local switch for which you wish to view 
remote trunking services. For example, to list the trunking station at port 1 of slot 3, you 
would enter:

If you do not enter a specific slot and station, the system automatically sends information 
on all services for the remote trunking stations associated with this group.

3. Once you have entered a slot and station, a table similar to the following is shown: 

The following sections describes the fields displayed by the 

 command.

. The slot number and station (port) number associated with the remote trunking 

station.

. The group number of the switch that is associated with this remote trunking station.

. The Media Access Control address of the remote trunking service.

The 

 command allows you to display the mapping between a packet’s destination 

MAC address and the remote Domain Bridge behind which it originated. To view this table:

1. Enter the 

 command as shown:

where 

 is the number of the group for which you want to see domain 

mappings of MAC addresses. For example, to view the mapping table for group 2, you 
would enter:

As a variation of this command, you can enter the 

 command without specifying a 

group. This will display mapping information for all groups on this switch.

2. A prompt asking for a canonical MAC address is displayed, as shown:

Enter the MAC address you want to see the Domain Mapping for, or press 

 with-

out entering a MAC address to see the mappings for all MAC addresses associated with 
this group.