Alcatel Carrier Internetworking Solutions Switch/Router 사용자 설명서

Configuring Fast Spanning Tree

Page 17-38

Enabling Fast Spanning Tree Port Parameters

The

actfstps

command allows you to activate Fast Spanning Tree port parameters on a

selected group or

VLAN

. To enable Fast Spanning Tree, enter the

actstps

command as shown:

actfstps <groupNumber>

where

<groupNumber>

is the number of the group in the switch for which you want to view

Fast Spanning Tree port parameters. For example, to view parameters for Group 1, enter:

actfstps 1

If Fast Spanning Tree is not enabled (default), a screen similar to the following will appear:

Fast Spanning Tree disabled for Group 1 (Default GROUP (#1))

Enable 1/ Disable 2 Fast Spanning Tree/ Return nothing?

To enable the Fast Spanning Tree feature, enter

at the prompt. (If you press the Enter key

without typing anything, the setting will not be changed.)

No confirmation message will appear. To view the Fast Spanning Tree Port Summary, enter

fstps

♦ Important Notes ♦

To determine whether Fast Spanning Tree is enabled
on a

VLAN

, enter

sts

at the prompt.

To enable Fast Spanning Tree on a

VLAN

, enter

stc