Alcatel Carrier Internetworking Solutions Switch/Router 사용자 설명서
Configuring SPX Keepalive Spoofing
Page 27-31
Enter
y
to proceed to enable spoofing.
4. The following prompt displays:
Enable SPX Spoofing on all WAN routing services? (y or n) (n) : y
This prompt requires you to verify that you want to enable spoofing in order to avoid the
situation of accidental spoofing of SPX packets. This example prompt asks if you want to
enable SPX spoofing on all WAN routing services. If you had entered a specific Group
number, the prompt would refer to that particular Group.
situation of accidental spoofing of SPX packets. This example prompt asks if you want to
enable SPX spoofing on all WAN routing services. If you had entered a specific Group
number, the prompt would refer to that particular Group.
Enter
y
to enable spoofing.
5. SPX Spoofing will then become active. A message will appear indicating that SPX Spoof-
ing is enabled, either on all WAN routing services, or for a specific Group:
SPX Spoofing is now enabled on all WAN routing services
Disabling SPX Keepalive Spoofing
Follow the steps below to disable SPX Keepalive Spoofing.
1. Enter
spxspoof
.
A screen similar to the following displays:
View the current spoofing status of all WAN routing services? (y or n) (n) :
Enter
y
if you do want to see the current SPX spoofing status. Enter
n
(or press
<Enter>
) if
you entered this command by mistake or if you don’t need to see the current status.
2. A screen similar to the following displays:
Group SPX Spoofing
----------
----------
----------------------------
3
Enabled
4
Enabled
Enter Group (default: all WAN) :
Enter a Group number to proceed to disable SPX spoofing for that particular Group.
Or, just press
<Enter>
to proceed to disable SPX spoofing for all WAN routing services.
3. The following prompt displays:
Enable Spoofing? (y or n) (n) :
Enter
n
to proceed to disable spoofing.
4. The following prompt displays:
Disable SPX Spoofing on all WAN routing services? (y or n) (n) : y
This prompt requires you to verify that you want to disable spoofing in order to avoid the
situation of accidental spoofing of SPX packets. This example prompt asks if you want to
disable SPX spoofing on all WAN routing services. If you had entered a specific Group
number, the prompt would refer to that particular Group.
situation of accidental spoofing of SPX packets. This example prompt asks if you want to
disable SPX spoofing on all WAN routing services. If you had entered a specific Group
number, the prompt would refer to that particular Group.
Enter
y
to disable spoofing.
5. SPX Spoofing will then become inactive. A message will appear indicating that SPX Spoof-
ing is disabled, either on all WAN routing services, or for a specific Group:
SPX Spoofing is now disabled on all WAN routing services